Release Notes for Synology Active Backup for Business Agent
Active Backup for Business — это универсальное решение для резервного копирования, позволяющее оптимизировать и улучшить защиту данных в разнородных ИТ-средах бизнеса. Перед тем как обеспечить защиту и резервное копирование данных, сохраненных на персональных компьютерах и физических серверах Windows, этот агент Synology Active Backup необходимо установить на целевом устройстве, чтобы он выполнял необходимые задачи резервного копирования и сохранял данные. Поскольку операции управления централизованно выполняются на стороне сервера, для выполнения большинства действий требуются права администратора DSM или устройства.
Version: 2.7.0-3221
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.7.0.
Version: 2.7.0-3218
Important Note
This version is replaced by version 2.7.0- 3221 because the staged rollout of version 2.7.0-3218 was paused to fix some errors.
Version: 2.6.3-3101
Important Note
- Active Backup for Business Agent 2.6.3 for Mac is only compatible with Active Backup for Business 2.6.3 and above.
- Improved Full Disk Access detection to prevent backup failure.
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.6.3.
Limitations
- After updating the Active Backup for Business Agent for Mac, the first backup will be a full backup.
Version: 2.6.2-3081
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.6.2.
Version: 2.6.1-3052
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.6.1.
Version: 2.6.0-3032
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.6.0.
Version: 2.5.1-2717
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.5.1-22717
Version: 2.5.1-2634
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.5.0 & 2.5.1.
Version: 2.5.0-2631
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.5.0.
Fixed Issues
- Fixed an issue where the agent might be stopped when the Linux device had software RAID in the system.
- Fixed an issue where installing the agent on Debian 11 might cause the system to stop during kernel upgrading.
- Fixed an issue where backup tasks might fail after the kernel version was updated to 4.18 on CentOS Stream 8.
Version: 2.4.2-2341
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.4.2.
Fixed Issues
- Fixed an issue where Linux devices running Debian 11 couldn't be backed up after their kernels were updated.
Version: 2.4.2-2339
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.4.2.
Fixed Issues
- Fixed an issue where Linux devices running Debian 11 couldn't be backed up after their kernels were updated.
Version: 2.4.1-2321
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.4.1.
Fixed Issues
- Fixed the issue where the system might fail to back up new files on devices with multiple partitions.
Limitations
- For Active Backup for Business Agent for Linux, the first backup after the update will be a full backup.
Version: 2.4.0-2234
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.4.0.
What's new
- Supports exporting log files.
Fixed Issues
- Fixed an issue where Active Backup for Business couldn't identify Linux devices' UUIDs and couldn't back up the devices.
- Fixed the issue where backups might fail when Linux devices contain volumes smaller than 1 MB.
Limitations
- For Active Backup for Business Agent for Linux, the first backup after the update will be a full backup.
Version: 2.3.0-2153
Compatibility and Installation
- Updated to be compatible with Active Backup for Business 2.3.0.
What's new
- Added support for Windows 11.
Fixed Issues
- Fixed an issue where the certificate of Active Backup for Business Agent for Linux couldn't be authenticated after renewing the Let's Encrypt certificate.
- Fixed an issue where the agent might crash if there were unsupported external devices or file systems.
- Fixed an issue where users couldn't install the agent due to WMI component corruption.
- Fixed an issue where the backup file might be corrupted if more than 10% of data on the Linux device was changed when the snapshot was taken.
Limitations
- After updating the agent for Linux, the first backup will be a full backup.
Version: 2.2.0-2074
Compatibility and Installation
- Upgraded to be compatible with Active Backup for Business 2.2.1-12074.
What's new
- Added hyperlinks to online help articles in error messages for troubleshooting.
- Supports backing up disks with the virtio_blk driver on Linux physical servers.
Fixed Issues
- Fixed an issue where backups might fail when there was a bad sector on the disk.
- Fixed an issue where backup tasks of Windows Server 2012 R2 and 2016 R2 might fail when Active Backup for Business Agent consumed too much memory.
Version: 2.2.0-2070
Compatibility and Installation
- Updated to be compatible with DSM 7.0.
What’s New
- Supports backing up Linux physical servers of the following distributions:
- CentOS: 6.10, 7.8, 8.1
- RHEL: 6.10, 7.8, 8.1
- Ubuntu: 16.04, 18.04, 20.04
- Fedora: 30, 31, 32
- Debian: 8.0 to 10
- Supports ECC certificates.
Version: 2.1.1-1125
Important Note
- Upgraded to be compatible with Active Backup for Business 2.1.1-1125.
Fixed Issues
- Fixed the issue where the backup schedule might not be executed properly when the time was not synced between the Synology NAS and the client device.
- Fixed the issue where the backup schedule might not be executed properly when the client device is hibernating or shut down.
Version: 2.1.1-1124
Important Note
- This version is replaced by Synology Active Backup for Business Agent 2.1.1-1125.
Version: 2.1.0-0993
Important Note
- Upgraded to be compatible with Active Backup for Business 2.1.0-0993.
- Starting from Active Backup for Business Agent 2.1.0, only Active Backup for Business 2.1.0 and above versions are compatible.
Fixed Issues
- Fixed an issue where backup data might be corrupted when the partition was mounted on the folder. For example, users enabled Sandbox.
Version: 2.1.0-0985
Important Note
- This version is replaced by Synology Active Backup for Business Agent 2.1.0-0993.
Version: 2.0.4-0621
What's New
- Thai user interface is now available.
Fixed Issues
- Fixed an issue where backing up the source containing dynamic disks might fail.
- Fixed an issue where the displayed backup time might be incorrect.
Version: 2.0.3-0472
Fixed Issues
- Fixed an issue where backup might fail when disk information is not accessible.
Version: 2.0.2-0468
What’s New
- Optimised user experience
- Enhanced system stability and performance
- Enhanced the richness and the readability of UI strings.
Fixed Issues
- Fixed an issue where agent installer might be falsely detected as malware by anti-virus softwares
- Fixed an issue where CBT writing errors might lead to calculation error of deduplication rate
- Fixed an issue where version that encountered internet interruption may not be able to be restored to Synology Virtual Machine Manager
- Fixed an issue where migrate a device to VMware multiple times may cause migration failure
- Fixed an issue where there is this chance a device cannot be deleted from the list successfully
Known issues
- Backing up physical devices with 4KN hard disks is not fully supported on Active Backup for Business for now.
- Peta-space shared folder is not supported to be backed up by Active Backup for Business for now.
Version: 2.0.1-0403
What’s New
User guide to create recovery media is ready to be downloaded.
Enhance the richness and readability of error messages.
Version: 2.0.0-0297
Changelog
- N/A
Version: 2.0.0-0284
What's new
Supports mass installation through Microsoft AD Server.
Supports backing up personal computer running Windows 7 and above versions.
Supports backing up physical server running Windows Server 2008 R2 and above versions.
Supports quick access to Active Backup for Business Portal from the monitor for granular restore.
Supports tracking real-time event through the monitor.
Supports detailed error messages.
Supports displaying last and next backup time for reference.
Supports changing IP through authentication.
Supports logging out devices only when DSM admin's username and password are entered.
Supports instant status monitor on the context menu.