Release Notes for Hyper Backup Vault
Hyper Backup Vault позволяет другому серверу Synology выполнять резервирование в Synology NAS через Hyper Backup. Hyper Backup Server Vault обеспечивает обзор всех объектов резервирования на Synology NAS.
Version: 4.1.1-3758
Compatibility & Installation
- Hyper Backup Vault 4.1.1 requires DSM 7.2 and above.
Fixed Issues
- Fixed an issue where users might not be able to view versions of the entire system backup data via Backup Explorer in Hyper Backup Vault or File Station.
Version: 4.1.0-3718
Compatibility & Installation
- Hyper Backup 4.1.0 requires DSM 7.2 and above.
Fixed Issues
- Fixed an issue where files might not display properly on Hyper Backup Explorer after updating Hyper Backup Vault to version 4.1.0-3716.
Version: 4.1.0-3716
Compatibility & Installation
- Hyper Backup Vault 4.1.0 requires DSM 7.2 and above.
- The entire system backup function is supported in specific models.
What's New
- Supports backing up the entire system using the faster block-level backup.
- Supports pausing the entire system backup process.
Fixed Issues
- Enhanced backup performance.
The Entire system backup function Applied Model
- FS series: FS6400, FS3600, FS3410, FS3400, FS2500, FS1018
- SA series: SA6400, SA3610, SA3600, SA3410, SA3400
- 23 series: RS2423RP+, RS2423+, DS1823xs+, DS923+, DS723+, DS423+
- 22 series: RS822RP+, RS822+, RS422+, DS3622xs+, DS2422+, DS1522+, DVA1622
- 21 series: RS4021xs+, RS3621xs+, RS3621RPxs, RS2821RP+, RS2421RP+, RS2421+, RS1221RP+, RS1221+, DS1821+, DS1621xs+, DS1621+, DVA3221
- 20 series: RS820RP+, RS820+, DS1520+, DS920+, DS720+, DS620slim, DS420+, DS220+
- 19 series: RS1619xs+, DS2419+II, DS2419+, DS1819+, DS1019+, DVA3219
- 18 series: RS3618xs, RS2818RP+, RS2418RP+, RS2418+, DS3018xs, DS1618+, DS918+, DS718+, DS418play, DS218+
Version: 4.0.0-3312
Compatibility and Installation
- Hyper Backup Vault 4.0.0 requires DSM 7.2 and above.
Version: 3.0.2-2531
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 3.0.2
Version: 3.0.2-2446
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 3.0.2
Version: 3.0.2-2529
Compatibility and Installation
- Updated to be compatible with DSM 7.1.1.
Version: 3.0.2-2444
Compatibility and Installation
- Updated to be compatible with DSM 7.1.1.
Version: 3.0.2-2517
Compatibility & Installation
- Updated to be compatible with DSM 7.1.
- Upgraded to be compatible with Hyper Backup 3.0.2 - 2517.
Version: 3.0.2-2432
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 3.0.2.
Version: 3.0.1-2412
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 3.0.1.
Version: 3.0.0-2277
Compatibility and Installation
- Updated to be compatible with DSM 7.0.
- This version is compatible with Hyper Backup on DSM 6.0, and existing backup tasks will not be affected after the update.
What's New
- Supports decrypting backup data encrypted by the ECC Curve 25519 encryption technology.
Version: 2.2.9-1521
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 2.2.9.
Version: 2.2.9-1520
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 2.2.9.
Version: 2.2.8-1510
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 2.2.8.
Version: 2.2.7-1374
Important Notes
- This update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on regions.
Fixed Issues
- Fixed an issue where the package could not be opened immediately after remote Hyper Backup tasks are created on the source Synology NAS.
Version: 2.2.6-1316
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 2.2.6.
Fixed Issues
- Minor bug fixes.
Version: 2.2.5-1261
- Upgraded to be compatible with Hyper Backup 2.2.5.
- Minor bug fixes.
Version: 2.2.4-1214
- Upgraded to be compatible with Hyper Backup 2.2.4.
- Minor bug fixes.
Version: 2.2.4-1213
Upgraded to be compatible with Hyper Backup 2.2.4.
Minor bug fixes.
Version: 2.2.3-1117
修正問題
- Upgraded to be compatible with Hyper Backup 2.2.3.
- Minor bug fixes.
Version: 2.2.2-1113
- Upgraded to be compatible with Hyper Backup 2.2.2.
- Minor bug fixes.
Version: 2.2.1-1110
What's New
- Supports backing up Hyper Backup Vault settings via Hyper Backup.
- Supports adding pending tasks to a task queue when there are multiple incoming backup tasks simultaneously.
- Introduced a new user interface.
Fixed Issues
- Minor bug fixes.
Version: 2.1.11-0754
- Upgraded to be compatible with Hyper Backup 2.1.11.
- Minor bug fixes.
Version: 2.1.10-0752
- Upgraded to be compatible with Hyper Backup 2.1.10.
- Minor bug fixes.
Version: 2.1.9-0747
- Upgraded to be compatible with Hyper Backup 2.1.9.
- Minor bug fixes.
Version: 2.1.8-0723
Thai user interface is now available.
Version: 2.1.7-0713
- Upgraded to be compatible with Hyper Backup 2.1.7.
- Minor bug fixes.
Version: 2.1.6-0681
- Upgraded to be compatible with Hyper Backup 2.1.6.
- Minor bug fixes.
Version: 2.1.5-0627
Fixed an issue where backing up files to remote servers might fail.
Version: 2.1.4-0625
- Upgraded to be compatible with Hyper Backup 2.1.4.
- Minor bug fixes.
Version: 2.1.3-0624
- Upgraded to be compatible with Hyper Backup 2.1.3.
- Minor bug fixes.
Version: 2.1.2-0604
- Upgraded to be compatible with Hyper Backup 2.1.2.
- Minor bug fixes.
Version: 2.0.5-0470
- Upgraded to be compatible with Hyper Backup 2.0.5.
- Minor bug fixes.
Version: 2.0.4-0469
- Upgraded to be compatible with Hyper Backup 2.0.4.
- Minor bug fixes.
Version: 2.0.3-0464
- Upgraded to be compatible with Hyper Backup 2.0.3.
- Minor bug fixes.
Version: 2.0.2-0433
- Upgraded to be compatible with Hyper Backup 2.0.2.
- Minor bug fixes.
Version: 1.2.2-0248
- Effectively shortened the operation time required for backing up large files.
- Minor bug fixes.
Version: 1.2.0-0232
- Upgraded to be compatible with Hyper Backup 1.2.0-0232.
- Minor bug fixes.
Version: 1.1.0-0140
- Upgraded to be compatible with Hyper Backup 1.1.0-0215.
Version: 1.1.0-0134
Fixed Issue
1. Fixed compatibility issues with Hyper Backup.
Version: 1.0-0085
- Fixed an issue where backup destinations might duplicate after upgrade.
- Improved restoration performance of Backup Explorer.
Version: 1.0-0083
- Fixed a security issue where connection requests from Hyper Backup with a non-existing account would not be auto blocked.
- Fixed an issue where restoring a target with read-only privilege might fail.
- Fixed an issue where backing up a non-sparse file over 512GB might fail.
- Fixed a compatibility issue where previously crashed backup tasks could not be deleted after upgrade.
- Fixed a compatibility issue where tainted targets might crash the application after upgrade.
- Fixed an issue where decryption would fail if the encryption key contained "," or "=".
- Fixed an issue where file system lock timeout occurred on xs+ models.
- Enhanced restoration performance.
Version: 1.0-0068
- Hyper Backup Vault is a new package and will be automatically installed upon upgrading to DSM 6.0 RC.
- You can enable backup services to allow another Synology NAS to back up to your Synology NAS via Hyper Backup.
- Provides an overview of the Hyper Backup targets backed up by other Synology NAS servers.
- Provides the information of each backup target, such as path, space usage, last backup time, backup duration and backup logs.
- With Hyper Backup Vault installed, you can launch the Hyper Backup Explorer by clicking the backup target in File Station.
Version: 4.1.1-3758
Compatibility & Installation
- Hyper Backup Vault 4.1.1 requires DSM 7.2 and above.
Fixed Issues
- Fixed an issue where users might not be able to view versions of the entire system backup data via Backup Explorer in Hyper Backup Vault or File Station.
Version: 4.1.0-3718
Compatibility & Installation
- Hyper Backup 4.1.0 requires DSM 7.2 and above.
Fixed Issues
- Fixed an issue where files might not display properly on Hyper Backup Explorer after updating Hyper Backup Vault to version 4.1.0-3716.
Version: 4.1.0-3716
Compatibility & Installation
- Hyper Backup Vault 4.1.0 requires DSM 7.2 and above.
- The entire system backup function is supported in specific models.
What's New
- Supports backing up the entire system using the faster block-level backup.
- Supports pausing the entire system backup process.
Fixed Issues
- Enhanced backup performance.
The Entire system backup function Applied Model
- FS series: FS6400, FS3600, FS3410, FS3400, FS2500, FS1018
- SA series: SA6400, SA3610, SA3600, SA3410, SA3400
- 23 series: RS2423RP+, RS2423+, DS1823xs+, DS923+, DS723+, DS423+
- 22 series: RS822RP+, RS822+, RS422+, DS3622xs+, DS2422+, DS1522+, DVA1622
- 21 series: RS4021xs+, RS3621xs+, RS3621RPxs, RS2821RP+, RS2421RP+, RS2421+, RS1221RP+, RS1221+, DS1821+, DS1621xs+, DS1621+, DVA3221
- 20 series: RS820RP+, RS820+, DS1520+, DS920+, DS720+, DS620slim, DS420+, DS220+
- 19 series: RS1619xs+, DS2419+II, DS2419+, DS1819+, DS1019+, DVA3219
- 18 series: RS3618xs, RS2818RP+, RS2418RP+, RS2418+, DS3018xs, DS1618+, DS918+, DS718+, DS418play, DS218+
Version: 4.0.0-3312
Compatibility and Installation
- Hyper Backup Vault 4.0.0 requires DSM 7.2 and above.
Version: 3.0.2-2531
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 3.0.2
Version: 3.0.2-2446
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 3.0.2
Version: 2.2.9-1521
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 2.2.9.
Version: 3.0.2-2529
Compatibility and Installation
- Updated to be compatible with DSM 7.1.1.
Version: 3.0.2-2444
Compatibility and Installation
- Updated to be compatible with DSM 7.1.1.
Version: 3.0.2-2517
Compatibility & Installation
- Updated to be compatible with DSM 7.1.
- Upgraded to be compatible with Hyper Backup 3.0.2 - 2517.
Version: 2.2.9-1520
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 2.2.9.
Version: 3.0.2-2432
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 3.0.2.
Version: 2.2.8-1510
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 2.2.8.
Version: 3.0.1-2412
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 3.0.1.
Version: 3.0.0-2277
Compatibility and Installation
- Updated to be compatible with DSM 7.0.
- This version is compatible with Hyper Backup on DSM 6.0, and existing backup tasks will not be affected after the update.
What's New
- Supports decrypting backup data encrypted by the ECC Curve 25519 encryption technology.
Version: 2.2.7-1374
Important Notes
- This update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on regions.
Fixed Issues
- Fixed an issue where the package could not be opened immediately after remote Hyper Backup tasks are created on the source Synology NAS.
Version: 2.2.6-1316
Compatibility & Installation
- Upgraded to be compatible with Hyper Backup 2.2.6.
Fixed Issues
- Minor bug fixes.
Version: 2.2.5-1261
- Upgraded to be compatible with Hyper Backup 2.2.5.
- Minor bug fixes.
Version: 2.2.4-1214
- Upgraded to be compatible with Hyper Backup 2.2.4.
- Minor bug fixes.
Version: 2.2.4-1213
Upgraded to be compatible with Hyper Backup 2.2.4.
Minor bug fixes.
Version: 2.2.3-1117
修正問題
- Upgraded to be compatible with Hyper Backup 2.2.3.
- Minor bug fixes.
Version: 2.2.2-1113
- Upgraded to be compatible with Hyper Backup 2.2.2.
- Minor bug fixes.
Version: 2.2.1-1110
What's New
- Supports backing up Hyper Backup Vault settings via Hyper Backup.
- Supports adding pending tasks to a task queue when there are multiple incoming backup tasks simultaneously.
- Introduced a new user interface.
Fixed Issues
- Minor bug fixes.
Version: 2.1.11-0754
- Upgraded to be compatible with Hyper Backup 2.1.11.
- Minor bug fixes.
Version: 2.1.10-0752
- Upgraded to be compatible with Hyper Backup 2.1.10.
- Minor bug fixes.
Version: 2.1.9-0747
- Upgraded to be compatible with Hyper Backup 2.1.9.
- Minor bug fixes.
Version: 2.1.8-0723
Thai user interface is now available.
Version: 2.1.7-0713
- Upgraded to be compatible with Hyper Backup 2.1.7.
- Minor bug fixes.
Version: 2.1.6-0681
- Upgraded to be compatible with Hyper Backup 2.1.6.
- Minor bug fixes.
Version: 2.1.5-0627
Fixed an issue where backing up files to remote servers might fail.
Version: 2.1.4-0625
- Upgraded to be compatible with Hyper Backup 2.1.4.
- Minor bug fixes.
Version: 2.1.3-0624
- Upgraded to be compatible with Hyper Backup 2.1.3.
- Minor bug fixes.
Version: 2.1.2-0604
- Upgraded to be compatible with Hyper Backup 2.1.2.
- Minor bug fixes.
Version: 2.0.5-0470
- Upgraded to be compatible with Hyper Backup 2.0.5.
- Minor bug fixes.
Version: 2.0.4-0469
- Upgraded to be compatible with Hyper Backup 2.0.4.
- Minor bug fixes.
Version: 2.0.3-0464
- Upgraded to be compatible with Hyper Backup 2.0.3.
- Minor bug fixes.
Version: 2.0.2-0433
- Upgraded to be compatible with Hyper Backup 2.0.2.
- Minor bug fixes.
Version: 1.2.2-0248
- Effectively shortened the operation time required for backing up large files.
- Minor bug fixes.
Version: 1.2.0-0232
- Upgraded to be compatible with Hyper Backup 1.2.0-0232.
- Minor bug fixes.
Version: 1.1.0-0140
- Upgraded to be compatible with Hyper Backup 1.1.0-0215.
Version: 1.1.0-0134
Fixed Issue
1. Fixed compatibility issues with Hyper Backup.
Version: 1.0-0085
- Fixed an issue where backup destinations might duplicate after upgrade.
- Improved restoration performance of Backup Explorer.
Version: 1.0-0083
- Fixed a security issue where connection requests from Hyper Backup with a non-existing account would not be auto blocked.
- Fixed an issue where restoring a target with read-only privilege might fail.
- Fixed an issue where backing up a non-sparse file over 512GB might fail.
- Fixed a compatibility issue where previously crashed backup tasks could not be deleted after upgrade.
- Fixed a compatibility issue where tainted targets might crash the application after upgrade.
- Fixed an issue where decryption would fail if the encryption key contained "," or "=".
- Fixed an issue where file system lock timeout occurred on xs+ models.
- Enhanced restoration performance.
Version: 1.0-0068
- Hyper Backup Vault is a new package and will be automatically installed upon upgrading to DSM 6.0 RC.
- You can enable backup services to allow another Synology NAS to back up to your Synology NAS via Hyper Backup.
- Provides an overview of the Hyper Backup targets backed up by other Synology NAS servers.
- Provides the information of each backup target, such as path, space usage, last backup time, backup duration and backup logs.
- With Hyper Backup Vault installed, you can launch the Hyper Backup Explorer by clicking the backup target in File Station.