E10G18-T1
E10G18-T1
Single-port, high-speed 10GBASE-T/NBASE-T add-in card for Synology servers
Flexible and economic solution for 10GbE adoption
Equipped with an RJ-45 connector and supports IEEE 802.3an/bz (10GBASE-T/NBASE-T) and 802.3x, E10G18-T1 helps you smoothly migrate to a 10GbE networking environment with your existing infrastructure. Supporting backward compatibility and auto-negotiation between 10Gbps, 5Gbps, 2.5Gbps, 1Gbps, and 100Mbps, E10G18-T1 is an economic solution to overcome the data transmission bottleneck for small businesses and home users.
5-year warranty
Built to handle intensive workloads, Synology network add-in-cards are backed by Synology's 5 year limited warranty.
Hardware Specifications |
||
---|---|---|
General |
||
General
|
Host Bus Interface | PCIe 3.0 x4 |
Bracket Height | Low Profile and Full Height | |
Size (Height x Width x Depth) | 68.1 mm x 86.0 mm x 13.6 mm | |
Operating Temperature | 0°C to 40°C (32°F to 104°F) | |
Storage Temperature | -20°C to 60°C (-5°F to 140°F) | |
Relative Humidity | 5% to 95% RH | |
Warranty | 5 Years | |
Notes | The warranty period starts from the purchase date as stated on your purchase receipt. (Learn more) | |
Network |
||
Network
|
IEEE Specification Compliance |
|
Data Transfer Rates | 10 Gbps | |
Network Operation Mode | Full Duplex | |
Supported Features |
|
|
Compatibility |
||
Applied Models |
||
Applied Models
|
|
|
Notes | DSM version requirement: 6.2-23739-2 onward (or 6.1-15284-2 onward with DSM 6.1) |
Notes:
- Model specifications are subject to change without prior notice.
- The figures are based on Synology internal testing. Each performance test is done individually. No other services or applications are processed at the same time.
- The actual performance may be lower than lab testing figure due to differences in server configuration, deployment, and the number of active operations.
- If usage requirements exceed the specifications above, please contact our regional partners for professional advice.