E10G18-T1
Downloads
Downloads
Daftar untuk menerima newsletter Synology

E10G18-T1

Single-port, high-speed 10GBASE-T/NBASE-T add-in card for Synology servers

E10G18_T1
E10G18_T1

Flexible and economic solution for 10GbE adoption

Equipped with an RJ-45 connector and supports IEEE 802.3an/bz (10GBASE-T/NBASE-T) and 802.3x, E10G18-T1 helps you smoothly migrate to a 10GbE networking environment with your existing infrastructure. Supporting backward compatibility and auto-negotiation between 10Gbps, 5Gbps, 2.5Gbps, 1Gbps, and 100Mbps, E10G18-T1 is an economic solution to overcome the data transmission bottleneck for small businesses and home users.

5-year warranty

Built to handle intensive workloads, Synology network add-in-cards are backed by Synology's 5 year limited warranty.

Hardware Specifications
General
General
 Host Bus Interface PCIe 3.0 x4
Bracket Height Low Profile and Full Height
Size (Height x Width x Depth) 68.1 mm x 86.0 mm x 13.6 mm
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature -20°C to 60°C (-5°F to 140°F)
Relative Humidity 5% to 95% RH
Warranty 5 Years
Notes The warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)
Network
Network
 IEEE Specification Compliance
  • IEEE 802.3x Flow Control
  • IEEE 802.3u Fast Ethernet
  • IEEE 802.3ab Gigabit Ethernet
  • IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet
  • IEEE 802.3an 10Gbps Ethernet
Data Transfer Rates 10 Gbps
Network Operation Mode Full Duplex
Supported Features
  • 9 KB Jumbo Frame
  • TCP/UDP/IP Checksum Offloading
  • Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s
Compatibility
Applied Models
Applied Models
  • FS series:FS6400, FS3600, FS3410, FS3400, FS3017, FS2500, FS2017, FS1018
  • SA series:SA6400, SA3610, SA3600, SA3410, SA3400D, SA3400, SA3200D
  • UC series:UC3400, UC3200
  • 23 series:RS2423RP+, RS2423+, DS1823xs+
  • 22 series:RS822RP+, RS822+, DS3622xs+, DS2422+
  • 21 series:RS4021xs+, RS3621xs+, RS3621RPxs, RS2821RP+, RS2421RP+, RS2421+, RS1221RP+, RS1221+, DS1821+, DS1621xs+, DS1621+
  • 20 series:RS820RP+, RS820+
  • 19 series:RS1619xs+, RS1219+, DS2419+II, DS2419+, DS1819+
  • 18 series:RS3618xs, RS2818RP+, RS2418RP+, RS2418+, RS818RP+, RS818+, DS3018xs, DS1618+
  • 17 series:RS18017xs+, RS4017xs+, RS3617xs+, RS3617RPxs, RS3617xs, DS3617xsII, DS3617xs, DS1817+, DS1517+
  • 16 series:RS18016xs+
  • 15 series:RC18015xs+, DS3615xs
  • 14 series:RS3614xs+, RS3614RPxs, RS3614xs
  • 13 series:RS10613xs+, RS3413xs+
  • 12 series:RS3412RPxs, RS3412xs, DS3612xs
  • 11 series:RS3411RPxs, RS3411xs, DS3611xs
Notes DSM version requirement: 6.2-23739-2 onward (or 6.1-15284-2 onward with DSM 6.1)

Notes:

  1. Model specifications are subject to change without prior notice.
  2. The figures are based on Synology internal testing. Each performance test is done individually. No other services or applications are processed at the same time.
  3. The actual performance may be lower than lab testing figure due to differences in server configuration, deployment, and the number of active operations.
  4. If usage requirements exceed the specifications above, please contact our regional partners for professional advice.